PHOS REM-PHOSPHATE REMOVER-1L

Natural phosphate remover for pool and spa.

Application
Weekly Treatment:
1. Use 15 ml of PHOSPHATE REM per 10,000 L of pool water or one capful in a spa, on a weekly basis to keep phosphate levels below 125 ppb.
Phosphate Treatment:
1. Backwash filter or rinse cartridge.
2. Spa: Use 6 mL (one capful) per 1000 L to reduce phosphate levels by 1000 ppb.
Ex. If the phosphate level is at 1000 ppb in a 1500 L spa use 9 mL (two capfuls) of PHOSPHATE REM.
Pool: Please refer to the dosage chart to calculate the amount of product needed.
Ex: If the phosphate level is 1000 ppb in a 40,000 L pool, use 240 mL of PHOSPHATE REM to treat.
3. Disperse the product around the pool or spa as wide as possible.
4. Run the pump continuously for 24 hours.
5. If the pool filter pressure increases, backwash. Rinse the spa cartridge regularly.
6. Recheck the phosphate levels after 48 hours. If necessary, redo the treatment.
Note: This treatment may cloud the water; this side effect is normal and will clear with filtration. To speedup the process use a “natural” based clarifier in conjunction with PHOSPHATE REM.