Basic Maintenance Tip for Hot Tubs: Clean Up the Filter to Avoid Clogs

Home/Info Articles/Basic Maintenance Tip for Hot Tubs: Clean Up the Filter to Avoid Clogs

Hot tub manufacturers recommend regularly servicing units. Neglecting the maintenance can cause the accumulation of pressure inside its plumbing system. If this happens, the pipes will be overworked, and problems will be inevitable in the long run.

Cleaning the filter is among the most basic methods of servicing Vancouver hot tubs. It’s essential to keeping it free from oils, debris, dirt, and grease. A clogged filter can also cause leakages in the heater and the pumps.

To keep your hot tub functioning properly, you may use the following guidelines.

basic maintenance

Step One: Locating the Filter

Turn off the heater to avoid mishaps then check the valves located beneath the tub. Here, you will find a hose between two valves, just under the skimmer. This is where you will find the filter. Some hot tubs in Vancouver have filtration systems that are easy to manipulate while others have filters that need to be twisted from the bottom to remove their cartridges.

Step Two: Cleaning It

Once you have removed the cartridge, gently pry any accumulated debris with a soft brush. It is very important to get rid of every single detail; if you encounter anything that is tough to eliminate, soak the cartridge in warm water. You can also add a few drops of white vinegar to remove all the lime ingredients that may be deposited in the filter.

Step Three: Whitening the Filter

If you are interested in whitening your filter, you can give the baking soda method a try. Just mix baking soda with water, put the filter in the solution, and let it soak for some time. This will also help to loosen up debris and also remove the remaining sediments.

Step Four: Cleansing It

After following up on the above cleaning procedure, you can use a garden hose to spray water directly to the filter. Most people use this method to open up the pores present. You should then let it dry up completely. This is, especially if you are planning to store the filter during the winter period, which is done to prevent it from becoming a breeding ground for bacteria and germs.

To get the most out of their services, you need to keep hot tubs in a spotless state. The frequency of cleaning the filters depends on how much you use them.

Sources:

Public Pools, Hot Tubs Rife With Health and Safety Violations, CDC Finds, abcnews.go.com
Hot Tub/Spa User Information, cdc.gov

About the Author: